RK3568 1 TOPS NPU POS Board for Convenience Store Counter, WF-P3602, AndroidSBC, Bangalore

TL;DR: RK3568 1 TOPS NPU POS Board for Convenience Store Counter

AndroidSBC release: twelve-model WF-P POS motherboard family opens for volume orders serving Bangalore, India. The WF-P3602 POS Android motherboard spans the mobile handheld POS with 4G and barcode engine and eleven sister models in the WF-P series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, MIPI DSI output at 720p, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Bangalore and India importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.

About AndroidSBC and the POS Android Motherboard Family

AndroidSBC designs the WF-P POS motherboards around the peripherals that a counter already owns: the thermal printer over RS232 or USB, the barcode scanner, the cash drawer on RJ11, the customer display on a second LVDS lane, and the payment reader on USB or serial. The Bangalore integrator re-uses the existing harness instead of rewiring the counter. The AndroidSBC engineering desk keeps a reference image per silicon tier, so aan India partner developing against the RK3576 board is testing against the same build that ships in volume, not a one-off sample image.

WF-P3602 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3602 (mobile handheld POS with 4G and barcode engine) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For India importers sourcing the WF-P family, the WF-P3602-A variant is the typical configuration for the tableside ordering handheld rollout use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing POS Android Motherboards for India Buyers

Most Bangalore buyers start with three shortlisted Chinese factories and discover that two of them are trading companies quoting a board they do not build. The sample arrives, the second batch does not match, and nobody can produce the test record.

On the peripheral side the driver SDK ships in the carton. Receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader and card reader drivers are validated against the shipping Android build before the lot leaves Longgang, and the BIS / WPC file that travels with the lot covers the radio modules too. AndroidSBC confirmed on September 23, 2026 that 16200 boards for Bangalore were on the water via Mumbai - Shanghai, with the peripheral validation report from the Longgang bench included in the packing list.

Competitive Comparison: WF-P3602 vs Competing POS Android Boards

The boards competing with the WF-P family in India tend to be single-platform designs. That is the root of three of the four differences below.

• Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
• Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.

Global POS Terminal and Smart Checkout Market Trends

The global POS payment terminal market was valued at about USD 123.15 billion in 2025 and is projected to reach roughly USD 215.45 billion by 2032, a compound annual growth rate near 8.25 percent, with the Asia Pacific region holding the largest share. For a Bangalore integrator that growth translates into a replacement cycle rather than a one-off project, and the board has to be specified for the third refresh, not the first.

• Entry counter tier: WF-P3602 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
• Dual-screen mainstream tier: WF-P3399 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
• AI and unattended tier: WF-P1330 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.

The India market will keep absorbing Android POS boards for the rest of the decade. The question for Bangalore buyers is whether the board underneath the terminal is built to be re-ordered.

Partner Success Story: Hanul Counter Systems (franchise chain POS integrator)

A Hanul Counter Systems rollout in the Korean franchise retail segment shows how the WF-P POS board family works in practice for Bangalore integrators. Hanul Counter Systems rolled out 16200 WF-P boards across 88 franchise counters.

• OEM relationship: AndroidSBC private-label SKU shipped with Hanul Counter Systems branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus BIS / WPC conformity, all bundled into the Shenzhen source-factory shipment.

As Hanul Counter Systems Head of Retail Platforms for Korean Franchise Retail put it: Hanul Counter Systems chose the WF-P family for the barcode engine performance against local GS1 prefixes, with 16200 boards released into the Bangalore franchise group.

Field Report: tableside ordering handheld rollout at a casual dining group

PINGHU, September 23, 2026 - Ling Yun, AndroidSBC field desk. The WF-P3602 shipped with staged OTA enabled, so the India team can pilot an update on ten lanes before releasing it across the estate. The WF-P3602 POS Android motherboard order for Bangalore, India cleared the burn-in station on schedule and is en route via the Mumbai - Shanghai lane.

The WF-P3602 mobile handheld POS with 4G and barcode engine production lot includes the WF-P3602-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For India integrators, the BIS CRS registration with WPC ETA for wireless modules paperwork is bundled.

Filed by Ling Yun, AndroidSBC field desk, PINGHU. India integrators typically request CE plus local radio interface notification for POS board deployments.

WF-P3602 Application Scenarios

The WF-P3602 mobile handheld POS with 4G and barcode engine sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3602-A configuration is the typical build for the tableside ordering handheld rollout use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.

• Supermarket and hypermarket checkout: the WF-P3602 drives the cashier screen while the second lane carries the customer display or the promotion wall in Bangalore.
• Convenience and small format stores: the WF-P6180 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
• Restaurants and quick service: the WF-P5270 runs the order screen plus a kitchen display output, with the customer display showing the order total.
• Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
• Unattended retail and vending: the WF-P7600 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
• Fuel forecourts and parking: the WF-P7601 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
• Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
• AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
• Retrofit programmes in Bangalore: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.

Partnership Models for Bangalore Buyers

The WF-P family is offered on distribution, integration or private-label terms, and a Bangalore partner can run more than one at a time.

• Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

Every track is open to Bangalore importers, distributors, system integrators and brand owners, with the same 1-3 day sample lead.

Frequently Asked Questions

Does the WF-P POS Android motherboard family support a mobile handheld POS with 4G and barcode engine?

Answer: Yes. mobile handheld POS with 4G and barcode engine is built into the WF-P family as a standard configuration, and the Bangalore pilot batch ships with that configuration already loaded and tested.

Which silicon tiers are available in the WF-P family for India buyers?

Answer: Eight tiers are available: the Rockchip RK3576 on 8nm, the RK3568 and RK3566 on 22nm, the RK3288 and RK3399 on 28nm, and the Allwinner A133, H618 and T527. The RK3568 tier is the one specified for this configuration.

Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?

Answer: Yes. A single WF-P board drives the thermal or receipt printer, the barcode or QR scanner, the cash drawer on RJ11 or RJ12, and the customer display, with all drivers bundled in the source-factory shipment.

What is the minimum order quantity and the sample lead time for India?

Answer: The sample MOQ is one unit with a 1-3 day lead. For volume, Bangalore partners work against a published price list with a 15-30 day production lead, and the BOM is frozen per lot.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. Firmware customisation, custom Android OS builds, boot branding, pre-installed apps and SDK modules are standard services, delivered against the same seven-year update window.

How are firmware updates delivered to aan India estate after deployment?

Answer: Updates are delivered through a staged OTA channel: the Bangalore partner pilots on a small group of lanes, holds the rest, and rolls back the image if the pilot shows a regression.

What shipping terms does AndroidSBC support for India orders?

Answer: AndroidSBC supports FOB Shenzhen, CIF and EXW pricing, and books the shipping lane against a production slot so the Bangalore delivery date holds.

What happens if a board fails in the field in India?

Answer: The warranty path starts from the serial number. The India partner files the RMA, AndroidSBC traces the lot and the test record, and a replacement ships on the same configuration.

Contact AndroidSBC: Start Your WF-P3602 Sourcing Conversation

To start a WF-P POS Android motherboard sourcing conversation with AndroidSBC, Bangalore integrators can reach the export desk through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to India buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-P family.